Prediction of liquid–liquid phase diagrams of aqueous salt+PEG systems using a thermodynamic model

In this study a thermodynamic model for the phase behavior of aqueous salt+polymer solutions is developed. The model is based on the solution theory of Hill, which included scaling laws for the polymer molecular mass dependence and Pitzer–Debye–Hückel theory. This model was tested for systems composed of two different molecular mass of polyethylene glycols (PEG) and five different inorganic salts. All the model parameters were determined from independent measurements. The agreement between the experimental and predicted phase diagrams by this model is good.     

粘土矿物对低渗透储层性质的影响——以鄂尔多斯盆地三叠系低渗透储层为例

粘土矿物是低渗砂岩储层的主要胶结物，对储层物性及开发过程中储层物性变化趋势有着重要的影响和控制作用。另外，粘土矿物也蕴含着大量沉积环境介质的物理化学信息，认识其自然规律，可以有效地指导预测有利储层，认识和改造油层。以鄂尔多斯盆地砂岩储层中的粘土矿物为研究对象，探讨分析粘土矿物对低渗储层性质的影响，该研究对含油气盆地低渗储层有效开发具有一定的参考价值。     

历史中心区复兴中的地域性问题与对策

本文以上海思南路47～48街坊改造为例,探讨城市形态更新与居民外迁问题,并期待相关地域性社会对策的出现。     

Advanced modulation formats for more robust optical transmission systems

Interest in advanced modulation formats for optical communication systems has so far experienced two major waves. The first one was motivated by the potential to enhance receiver sensitivity of thermal noise-limited systems using coherent detection in combination with phase shift keying. It ended with the advent of optical amplification, enabling high sensitivities together with polarization insensitive, simple and stable direct detection. The second wave is still rolling, fueled by the potential of advanced modulation formats to increase robustness of optical transmission systems against signal distortions. Due to performance limitations given by direct detection and nonlinear effects in the transmission fiber, it is not decided yet, whether there will be widespread application in carrier networks.     

Solving thermal and phase change problems with the eXtended finite element method

 The application of the eXtended finite element method (X-FEM) to thermal problems with moving heat sources and phase boundaries is presented. Of particular interest is the ability of the method to capture the highly localized, transient solution in the vicinity of a heat source or material interface. This is effected through the use of a time-dependent basis formed from the union of traditional shape functions with a set of evolving enrichment functions. The enrichment is constructed through the partition of unity framework, so that the system of equations remains sparse and the resulting approximation is conforming. In this manner, local solutions and arbitrary discontinuities that cannot be represented by the standard shape functions are captured with the enrichment functions. A standard time-projection algorithm is employed to account for the time-dependence of the enrichment, and an iterative strategy is adopted to satisfy local interface conditions. The separation of the approximation into classical shape functions that remain fixed in time and the evolving enrichment leads to a very efficient solution strategy. The robustness and utility of the method is demonstrated with several benchmark problems involving moving heat sources and phase transformations. Received 20 May 2001 / Accepted 19 December 2001     

The Year 2015 Fusion Power Conversations

Assuming significant technical success in the ITER project by the year 2015, it is likely that governments will want to develop a more comprehensive plan for DT tokamak fusion power commercialization. To provide a glimpse into many of the related issues, we construct conversations between the director of the U.S. fusion program and three specialists key to commercial fusion success: an environment and safety regulator, an environmentalist, and an electric generation investor. The insights from these imagined conversations will hopefully be of value as tokamak fusion power proponents plan beyond ITER.     

The radiation crosslinking and scission of ethylene-propylene copolymers studied by solid-state nuclear magnetic resonance

Methyl groups from chain scission and H-crosslinks have been identified by solid-state nuclear magnetic resonance in amorphous ethylene-propylene copolymers containing 23 and 36 mole % propylene after γ-irradiation to 10 MGy at 30°C. G (scission) and G (crosslink) values determined from the n.m.r. spectra and by extraction are in agreement, which suggests that the crosslinks are not clustered. This may differ from the situation in polyethylene where there is a substantial crystalline content. G(S). G(X) and the ratio G(S)/G(X) increase with increasing propylene content of the copolymers.     

喷射导管技术在深水钻井作业中的应用

深水油气日益成为海洋石油勘探开发的热点，但深水钻井作业面临着许多难题和挑战，喷射导管技术是解决深水浅层钻井难题的技术之一。该技术采用在喷射管柱内下动力钻具的方式，用钻入泥线以下的管串自身重力钻进，喷射到位后利用地层的粘附力和摩擦力稳固住导管，起出送入工具和管内钻具，完成导管的安装。喷射导管技术可避免因水泥浆密度过大而压破地层，也可避免深水由于低温等因素影响固井质量。我国第一口水深超千米的深水井——荔湾3-1-1井利用该技术成功完成了导管的安装，井口装置没有出现井口失稳的问题。随着我国深水勘探步伐的加快，越来越多的深水区块将投入勘探开发，喷射导管技术具有良好的应用前景。     

p,V, T and derived thermodynamic data for toluene,trichloromethane, dichloromethane,acetonitrile, aniline,and n-dodecane

Experimentally determined p,V,T data are reported for toluene, trichloromethane, dichloromethane, acetonitrile, aniline, and n-dodecane at 278, 288, 298, 313, and 323 K, except for dichloromethane, for which the highest temperature was 298 K. At each temperature, measurements were done at pressures up to about 280 MPa or (for aniline and n-dodecane) at a lower pressure slightly below the freezing pressure at the temperature of measurement. Values of the isobaric expansivity isothermal compressibility and (for toluene, trichloromethane, dichloromethane, and acetonitrile) internal pressure, derived from the p,V,T data, are presented.